1-855-976-5190
Request a Quote
Monsoon 3' X 6' Wet Downdraft Table
Monsoon 3' X 6' Wet Downdraft Table - Image 2
Monsoon 3' X 6' Wet Downdraft Table - Image 3
Monsoon 3' X 6' Wet Downdraft Table - Image 4
Ducted Downdraft Tables

Monsoon 3′ X 6′ Wet Downdraft Table

The Monsoon 3’ x 6’ Wet Downdraft Table is one of the most high-performing, cost effective wet collector downdraft tables on the market. Safely capturing combustible dust at source, the Monsoon 3’ x 6’ Wet Downdraft Table has one of the smallest equipment footprints in the industry. This stainless steel wet collector with a single workstation provides exceptional performance for industrial grinding and sanding applications. Its self-contained design achieves a high-face velocity at a very affordable price.
The Monsoon 3’ x 6’ safely captures combustibles by pulling contaminated air through the ventilated work surface and moving them into a torrent of water. The dust particles then bond with suspended water droplets before draining down to the bottom of the collector for safe removal.
The Monsoon 3’ x 6’ Wet Downdraft Table comes equipped with an Auto-Water Level Control System that automatically maintains correct water levels in the basin. The cabinet’s stainless steel construction guards against corrosion and the collector’s internal components can be removed for easy cleaning.

Recommended Applications

  • Not Ideal for welding.
  • Ideal for grinding.
  • Ideal for deburring.
  • Not Ideal for soldering.
  • Ideal for sanding.
  • Not ideal for painting.
Request a Quote

 

Overview

The Monsoon 3’ x 6’ Wet Downdraft Table is designed for grinding, sanding, deburring, and finishing—where fine particulate and dust buildup can threaten worker safety. By combining water filtration with powerful airflow, this wet collector downdraft table prevents combustible dust from accumulating and minimizes fire risk.

The Monsoon’s compact footprint makes it an ideal downdraft table for grinding and downdraft table for sanding in smaller shops or confined workspaces. With 5000 CFM of airflow powered by a 10 HP TEFC motor, the unit provides exceptional suction across the entire work surface for maximum efficiency.

Designed for the safe collection of combustible metal dusts, ideal applications include: aluminum, magnesium, titanium, grinding and sanding, powder mixing, and buffing.

Benefits

  • Capture-at-source for clean air and improved worker safety
  • Industrial swivel castors included for portability
  • Compliant with NFPA guidelines for combustible dust
  • Compact stainless steel design with corrosion resistance
  • Small footprint, simple operation, and low maintenance

Features

  • Flexible 73” x 36” ventilated work surface for single or multi-tool setups
  • High Capture Face Velocity (230 FPM)
  • 10 HP TEFC Motor producing 5000 CFM of Airflow
  • Stainless Steel Anti-corrosion Construction
  • Auto-Level Water Control System to maintain optimal water level
  • Stainless steel anti-corrosion construction for long-term durability

Options

  • Auto Wash-down System
  • WV-55 Sludge-Vac
  • Side and Back Walls
  • HEPA Afterfilter Kit (99.99% @ 0.3 micron)
  • Dust-Tight / Vapor-Tight Light Kit
  • Custom configurations available to meet specific industrial wet downdraft table needs

Why Choose a Wet Downdraft Table?

Wet downdraft tables are ideal for operations where dry dust presents a combustion hazard. The Monsoon’s design allows combustible dust to bond with water droplets, removing ignition risks while improving air quality. This table for wet grinder applications ensures clean, safe performance for high-dust processes like sanding, grinding, and finishing.

Whether you need a wet collector with a single workstation or a larger integrated system, Diversitech provides reliable, NFPA-compliant wet downdraft tables that help you maintain a safer, cleaner workspace.

Models and Options

The MonsoonTM 3′ X 6′ Wet Downdraft Table standard base model comes equipped with a 230V, 10.0 HP motor, but the following options and add-on kits are also available upon request:

STANDARD 10 HP – 575V

Up to 5000 CFM
  • Standard Model
  • 230 FPM
  • Motor: 10.0 HP HP / 575V/3/60Hz
  • Filter Type: Mist Filter
  • Product Number: MDD-3X6-100W5
Request a Quote

GDS / 10 HP – 230V

Up to 5000 CFM
  • Grinding, Deburring & Sanding Kit
  • 230 FPM
  • Motor: 10.0 HP HP / 230V/3/60Hz
  • Filter Type: Mist Filter
  • Product Number: MDD-3X6-100W2-GDS
Request a Quote

GDS / 10 HP – 460V

Up to 5000 CFM
  • Grinding, Deburring & Sanding Kit
  • 230 FPM
  • Motor: 10.0 HP HP / 460V/3/60Hz
  • Filter Type: Mist Filter
  • Product Number: MDD-3X6-100W4-GDS
Request a Quote

GDS / 10 HP – 575V

Up to 5000 CFM
  • Grinding, Deburring & Sanding Kit
  • 230 FPM
  • Motor: 10.0 HP HP / 575V/3/60Hz
  • Filter Type: Mist Filter
  • Product Number: MDD-3X6-100W5-GDS
Request a Quote

AWW / 10 HP – 230V

Up to 5000 CFM
  • Auto Water Wash-down Kit
  • 230 FPM
  • Motor: 10.0 HP HP / 230V/3/60Hz
  • Filter Type: Mist Filter
  • Product Number: MDD-3X6-100W2-AWW
Request a Quote

AWW / 10 HP – 460V

Up to 5000 CFM
  • Auto Water Wash-down Kit
  • 230 FPM
  • Motor: 10.0 HP HP / 460V/3/60Hz
  • Filter Type: Mist Filter
  • Product Number: MDD-3X6-100W4-AWW
Request a Quote

AWW / 10 HP – 575V

Up to 5000 CFM
  • Auto Water Wash-down Kit
  • 230 FPM
  • Motor: 10.0 HP HP / 575V/3/60Hz
  • Filter Type: Mist Filter
  • Product Number: MDD-3X6-100W5-AWW
Request a Quote

Technical Specifications

Model (Product Number) Motor (H.P.) Air Flow (CFM) Volts/Phase/Hz Amps Net Weight1 Width1 Height1 Length1 Noise (dB) Filter Type
MDD-3X6-100W2 10.0 HP 5000 230V/3/60Hz 28 293.02 115 89 45 78 Mist Filter
MDD-3X6-100W4 10.0 HP 5000 460V/3/60Hz 14 293.02 115 89 45 78 Mist Filter
MDD-3X6-100W5 10.0 HP 5000 575V/3/60Hz 11 293.02 115 89 45 78 Mist Filter
MDD-3X6-100W2-GDS 10.0 HP 5000 230V/3/60Hz 28 N/A 115 89 45 78 Mist Filter
MDD-3X6-100W4-GDS 10.0 HP 5000 460V/3/60Hz 14 N/A 115 89 45 78 Mist Filter
MDD-3X6-100W5-GDS 10.0 HP 5000 575V/3/60Hz 11 N/A 115 89 45 78 Mist Filter
MDD-3X6-100W2-AWW 10.0 HP 5000 230V/3/60Hz 28 N/A 115 89 45 78 Mist Filter
MDD-3X6-100W4-AWW 10.0 HP 5000 460V/3/60Hz 14 N/A 115 89 45 78 Mist Filter
MDD-3X6-100W5-AWW 10.0 HP 5000 575V/3/60Hz 11 N/A 115 89 45 78 Mist Filter

1 – Product weight and dimensions are based on base-models and may vary depending on selected product features. Please contact us for an accurate shipping quote.

Learn how to get the most out of your Monsoon 3′ X 6′ Wet Downdraft Table and troubleshoot common problems.
See our help topics and support videos below, and download the Monsoon 3′ X 6′ Wet Downdraft Table product guide and owner’s manual.

How to..

+ Set up your Monsoon 3' X 6' Wet Downdraft Table for the first time

Before You Begin

Designate a location near the operator where the unit will be placed that is sufficiently close to a grounded power source.

Unpacking Unit

  1. Inspect carton for any possible damage during transit.
  2. Remove packing material.
  3. Do not tip or invert while handling.
  4. You’ll find the item serial number, model and electrical ratings located on the nameplate. Write down this information on the provided Maintenance Record found in your owner’s manual or your own designated preventative maintenance system.

Installation

  1. Connect to air inlet.
    1. If possible, use smooth bore ducting as they have less airflow resistance.
    2. Inlet ducts should be full diameter. Changes in section and size should be gradual.
  2. Connect pipes to water supply and drain fittings. (Refer to Section 2.1 in owner’s manual.)
  3. Connect power. (Refer to Appendix 1A in owner’s manual.)
  4. Verify motor rotation is clockwise when looking top down from unit.
  5. Fill Collector’s water basin to indicated level.
+ Perform Function Test Prior To Use

Before you use your unit, you’ll want to perform a function test to verify it’s in working order. Do the following:

  1. Turn the power switch to On.
  2. Look to confirm that the unit is level and stable. You’ll also want to verify that nothing is obstructing the extraction path and that there is enough water in basin.
  3. Listen closely to the motor and suction sound of unit. Confirm that they are in within the expected volumes.
  4. By placing your hand on top of the unit, feel for any unexpected vibration. Place your hand in front of the intake surface to confirm the expected levels of suction.
+ Maintain Your Wet Downdraft Table

Perform Daily Inspections

  1. Inspect surfaces for dust. Wipe down as needed.
  2. Inspect filter panels for dust buildup. Service or replace as needed.
  3. Check to see if unit has sufficient water. Refill to meet water level if needed.
  4. Check for moisture by turning unit on and placing hand above exhaust stack. If excess moisture passes through blower, drain water from basin to indicated level.

Exchange Water (Every 2 Weeks or 30 Operating Hours)

    1. Remove water using drain outlet.
      1. Be careful to keep water and waste away from electrical equipment.
      2. Consult local regulators on the safe handling, disposal and treatment of material waste.
    2. Remove grating.

    1. Remove scrubber tree.

  1. Using a Diversitech WV Sludge Vacuum or equivalent, remove semi-solid build-up at the bottom of the basin.
    IMPORTANT: Consult local regulators on the safe handling, disposal and treatment of material waste.
  2. Use pressure washer or plastic bristle brush to clean basin (no metallic brushes).
  3. Turn machine on to allow Auto-Level Control System to fill the basin or fill manually.

Perform Annual Inspections

  1. Clean labels and exterior surfaces.
  2. Wash cabinet internal assemblies with warm water and mild detergent. Allow 12 hours to dry before use.
  3. Check controls for loose wiring.
  4. Examine motors for wear.

Troubleshooting

+ My Wet Downdraft Table Does Not Turn On
  1. Confirm the correct voltage is supplied into the panel.
  2. Confirm all fuses are functional.
  3. If the problem continues, or your unit does not fill with water, contact Diversitech support for assistance.
+ My Wet Downdraft Table Does Not Pull Air
  1. Confirm the correct rotation using the indication arrow located on the motor. If the unit fails to turn on, the unit’s motor could be in reverse rotation and spinning incorrectly. An electrician is required to address the problem.
  2. Confirm that the water level is correct using the arrow indicator located on the unit.
  3. Inspect all filters in your unit to verify they are in working order.
+ Water is Escaping through the Exhaust Stack
  1. Check the water level. If water is escaping through the stack, there may be too much water inside the unit. (Once levels exceed the maximum 4 inches, motor turns off.)
  2. Check the table top surface for unnecessary items. The Monsoon’s table top surface is perforated to allow airflow through the unit. If the table top is over-covered with items, airflow through the unit will be restricted, causing water to escape.
  3. Check Baffle Tree Assembly Installation. If water is escaping through the stack, it could be a sign that the baffle tree assembly has not been reinstalled correctly.
+ The Auto-Wash is Malfunctioning
  1. Check to see if the foot valve on the wash kit is clogged. All wash kits have a foot valve which recirculates the water to the nozzle tips. To keep the foot valve from clogging and the auto-wash functioning properly, regular maintenance is required.
  2. Check the condition of the banjo filter. To ensure the auto-wash functions properly, regular maintenance of the banjo filter is required.
  3. Once maintenance is performed on both the foot valve and the banjo filter, you will need to prime the pump before reuse.
+ The Photohelic Shows a Reading of 7-8.

If the photohelic shows a reading above 7 or 8, the HEPA filter needs to be replaced.

Guides

Mitchell Aerospace

St-Laurent, Quebec

Due to their manufacturing processes, Mitchell Aerospace required a solution that could simulaneously eliminate unbreathable dust while protecting their facility from combustible dust fires.

Learn More

A Closer Look at Monsoon 3' X 6' Wet Downdraft Table

Get an in-depth look at Monsoon 3′ X 6′ Wet Downdraft Table and explore its key features in action.
This video showcases how it works, its standout benefits, and why it’s the perfect choice for you. Watch now and experience the innovation firsthand!

Swipe Through the Details of Monsoon 3' X 6' Wet Downdraft Table

Get an in-depth look at Monsoon 3′ X 6′ Wet Downdraft Table and explore its key features in action. This video showcases how it works, its standout benefits, and why it’s the perfect choice for you. Watch now and experience the innovation firsthand!

Related Products

In stock
WV 55 Sludge Vacuum

The WV Sludge Vacuum offers a fast, easy way to clean dust, chips and swarf out of wet dust collectors and other equipment.

VIEW DETAILS
GET A QUOTE
In stock
Monsoon Mini Wet Downdraft Table

30″ x 36″ worksurface, self-contained wet downdraft table with manual water fill.

VIEW DETAILS
GET A QUOTE
In stock
Monsoon 3′ X 4′ Wet Downdraft Table

48″ x 36″ worksurface, self-contained wet downdraft table with auto-water fill.

VIEW DETAILS
GET A QUOTE
In stock
Monsoon 3′ X 8′ Wet Downdraft Table

97″ x 36″ worksurface, self-contained wet downdraft table with auto-water fill.

VIEW DETAILS
GET A QUOTE

Request A Quote

Please provide the information requested below so we can provide you with a timely and customized solution for your specific needs.